![]() ![]() For more information on how to install your camera please refer to the physical installation guide found here. When installing your camera, please keep this in mind and adjust your camera in accordance with the proper alignment of the area you wish to monitor. If you are controlling your camera through the Amcrest View Pro app or on a computer, and it is a 5MP or higher camera, you will not have the ability to flip or rotate the image automatically in a 90° or 270° flip rotation. HOW DO I FLIP MY CAMERAS VIDEO STREAM To flip or mirror the cameras video stream, tap the flip/mirror icon in the app. The camera's lens has the ability to be manually moved in various ways as pictured in the image below: All positioning actions to the camera will have to be performed manually. For this reason, it is imperative to make sure to mount the cameras properly and position them as efficiently as you can to the areas you wish to monitor. ![]() ![]() Align the mounting bracket to the drilled holes and place the 9/16 concrete anchor screw to the mounting bracket. Using a 9/16 drill bit, drill a hole into each marked area to insert the appropriate concrete anchor screw into the hole. Due to specific hardware limitations within your camera, it is important to note that these devices will not be able to automatically pan/tilt or pivot in either the app or via the web UI on a computer. Run the camera wiring through the mounting bracket and to the applied 1 hole created for in-wall installation. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |